|   | 
          
            | 
          
        
                
1	Identification of the substance/preparation 
_________________________________________________________________________________________ 
 
Commercial name		CERALOY  
 
Data Manufacturer / Trader 
 
Neirynck & Vogt  N.V. 
Molenberglei 22 
B-2627 Schelle 
Information source:		devision consumables production 
Telephone:			(32) 03-843 20 12 
Telefax:				(32) 03-843 20 13 
 
 
2	Composition/information on ingredients 
_________________________________________________________________________________________ 
 
Chemical Characterisation :            (   ) product    ( x ) preparation 
 
The alloy Ceraloy contains Ni max; 67%, Cr 23%, Mo 10%, C,Si,Fe It also contains Molybdän. 
 
Dangerous components:	none 
 
 
3	Special hazards information for man and environment 
_________________________________________________________________________________________ 
 
Most important dangers are : 
 
-	Products reacting with other components ( see N° 10 ) 
-	emission of Smoke,  Gasses, Dust; Skin contact  ( see N° 11 ) 
-	burning of the dust in free air ( see N° 5 )			 
 
 
4	First Aid Measures 
_________________________________________________________________________________________ 
 
After Inhalation: 
 
-	When large portions were inhaled, or when an Asthm attack starts, 
one has to contact a doctor. 
 
After skin contact : 
 
-	Rinse the afflicted zones with lots of water or take a shower. 
-	Take off the poluted clothes and wash them before re-using. 
-	Longer and repeated contacts with skin are to be avoided. 
-	After usage, take a bath . 
 
After contact with eyes : 
 
-	Rinse minimum 15 minutes with water. 
 
After swallowing : 
 
-	When a large amount was swallowed : provoque vomitting when the person; 
has full consiousness 
-	Contact a doctor. 
 
 
5	Fire-Fighting measures 
_________________________________________________________________________________________ 
 
Alloys of Nickel and Chrome procure no danger for fire or explosion. 
When such alloy it brought in very fine condition  (dust), it could lead to Explosion in free air. 
 
Fire extictors :		Water, CO2, foam 
 
Fire extinctors not to use for security reasons :		none 
 
Risks resulting from the burning or from ist gasses :	poisonning ( see N° 11 ) 
 
Special fire extintor installations:	respiratory device and protection												clothing are recommended.					 
 
 
6	Accidental release measures 
_________________________________________________________________________________________ 
 
Individual messures :		avoid formation of dust 
 
Messures for environment :	not necessary 
 
Cleaning methods:			not necessary 
 
 
7	Handling and storage 
_________________________________________________________________________________________ 
 
Treathment :	Same caution as with all chemical substances. 
 
Stocking :	No special messures required for stocking the alloy . 
 
 
8	Limits of exposure and personnal protection 
_________________________________________________________________________________________ 
 
Extra indications on technical devices :	( see N° 7 ) 
 
Personal Protection equipment: 
 
-	Inhalation :	When the solid form of the  Nickel-Chrom-alloy, during the  Production, 
changes in dust or smoke, keep the environmental conditions under the 
indicated limits ;	( Cr < 0,050 mg/ m3 ; Co < 0,050 mg / m3 ) 
When the airconditionning is not sufficient, use a correct inhaling protection. 
 
-	protection of hands :	protection gloves 
 
-	Eye protection :		protection glasses 
 
-	Skin protection :		proper clothing 
 
 
9	Physical and Chemical Properties 
_________________________________________________________________________________________ 
 
Exterior aspects 
 
Form :	Solid 
Colour :	Silvergray 
Smell :	no smell 
 
Securety relevant data 
 
Liquification in air :					none 
 
Melting point :						> 1.200°C 
 
PH :								not applicable 
 
Flash point :						not applicable 
 
Self burning :						not applicable 
 
Explosion capacities :					not applicable 
 
Air pressure leading to burning (Standard) :	Unknown 
 
Absolute density (Standard) :				8,1 – 8,2 g*cm-3 
 
Solution capacities :					unsolluble in water 
 
Solution in grease :					unsolluble 
 
Repartition coefficient :					not apllicable 
 
 
10	 Stability and Reactivity 
_________________________________________________________________________________________ 
 
Conditions to avoid :	Under certain circumstances 
(High pressure, high carbon concentration )  
Toxical Nickel Karbonyl could be formed. 
 
Substances to avoid :	Ammonium Nitrate, Hydrazin, Alkali, Oxiding acids 
 
Dangerous residual products :	Hydrogen can be formed in contact with acids 
 
Necessary or present Stabilisors :	Not applicable 
 
Eventual exothermical dangerous Reactions :	Not applicable 
 
Possible Aggregate form changes :	Not applicable 
 
Dangerous derivates in cantact with water :		Not applicable 
 
General indications :		In normal conditions stable and no decomposition. 
 
Hazardous decomposition products :		Not known if used as indicated 
 
 
11	 Toxicological information 
_________________________________________________________________________________________ 
 
Under normal working conditions, the composition of Nickel-Chrome alloys is not very Dangerous. 
When small particals are formed, then there may be an acute  toxicological risk  
 
After inhaling :		Very rare are Astm attacs due to the dust provoqued. 
One can see some influences on the gastro intestinal and inhalation canals. 
 
After skin contact :	Nickel-Chrome alloys could provoque inflammation or allergical reactions  
to sensitive persons. 
 
After eye contact :	Inflammations, due to mechanical reasons. Workers who were in contact with electolitical aerosols, have shown eye inflammations. 
 
After swallowing :	Nickel-Chrome alloys are not absorbed by the darm canals. 
The swallowing of lots of alloy could procure intestinal pains, 
vomiting or poisonning. 
When swallowing alloy over a long time span, kidny problems can arise. 
 
 
12	 Ecological information 
_________________________________________________________________________________________ 
 
Changeability :			Not applicable 
 
Resistance or break down :	Not known 
 
Bio obstuction potential :		Studies on  Nickel in the water evacuation chain have shown   
Nickelkoncentration in or on the evacuation chain. 
This demonstrates that there is no risk of damage to this water 
evacuation chain. 
 
Watertoxity :				Above 0,05 mg/l  Nickel  is toxical. Nickel has an acute toxical 
effect on fishes and amphibies. 
 
Indications for ellimination :	No special indications 
 
Specific indication :			Do not flush into sanitary water system 
 
 
13	 Disposal considerations 
_________________________________________________________________________________________ 
 
Follow state rulings and consider help from specialized firms. 
 
 
14	 Tansport information 
_________________________________________________________________________________________ 
 
Landtransport :		Class/Number/Capital Letter 
 
River shiptransport :		Class/Number/Capital Letter 
 
Sea shiptransport :		Class 
 
Air transport :			Class 
 
 
15	 Regulatory information 
_________________________________________________________________________________________ 
 
Indications after EG-Ruling 
 
Danger indications 
Product contents 
R-phrases 
S-phrases 
 
Other Indications :				No indications after GefSoffV (26.08.86) 
 
National ruling	 
 
Indications for treatment restictions	Not Applicable 
Rules on separation possibilities  VbF	Not Applicable 
TA-Air						Not Applicable 
Water danger class      				Not Applicable 
 
 
16	 Other information 
_________________________________________________________________________________________ 
 
With the above indications, reflecting our actual state of knowledge and   
experience, we want to give an insight of the security data of our products,   
though we do not include to that any capacity affirmations or quality restrictions.  
  
           |